What are the components of Guangdong CNC milling machine.
CNC milling machine is a set of automatic processing equipment developed on the basis of ordinary machine tools.
The machining function of CNC milling machine has been promoted in the industrial production industry, which can process splines, worm gears, gears, boring and so on.
The following describes the overall components of the device:
1. The worktable and the saddle are mainly supported on the wide horizontal guideway of the lifting platform.
The longitudinal feed of the worktable is driven by a servo motor installed at the right end of the worktable, and the inner tooth pulley drives a precision ball bar pair to make the worktable get longitudinal feed.
2. The lifting platform locks the handle on the left, and a long handle is installed at the front end to drive the bevel gear and the screw of the lifting platform to rotate, so as to obtain the lifting movement of the lifting platform.
3. The milling head of the CNC milling machine is composed of a hierarchical gearbox and a milling head.
The spindle of the milling head is supported on the high-precision bearing, which ensures the rigidity of the spindle with high reverse precision.
4. The transverse feed part is equipped with an AC servo motor in front of the lifting platform, which drives the saddle of the bed to move laterally, which is the same as the longitudinal feed principle of the operating platform.
The front end of the transverse ball screw is equipped with a feeding handwheel, which can complete manual feeding.
5. Verb (abbreviation for verb) the bed is equipped with a reasonably rigid internal strengthening device.
The base is equipped with four adjusting bolts to facilitate the machine tool to adjust the level.
The cutting oil pool is located inside the bed.
6. Cutting oil cooling system is the cooling part of CNC milling machine, including cutting oil pump, outlet pipe, reflux tube, switch button and nozzle.
The cutting oil pump is generally installed in the inner cavity of the machine tool base, and the cutting oil in the fuel tank in the base is pumped to the oil storage pipe and ejected through the nozzle to cool the cutting area.
7. The spindle box structure of the NC milling machine includes the spindle drive system and the spindle box, which is used to clamp the tool and drive the tool rotation. The spindle speed calibration and output torque have a direct impact on the machining.
The above collates and summarizes the components of Guangdong CNC milling machine. I hope it will be helpful to all of you.
